Workshop Repair and Service Manuals GMC SIERRA
Articles

Body Exterior

05-08-51-001F Information on Paint Stain Under Protective Shipping Film - (Oct 22 2013) Emblems Decals Paint      Subject: Information on Paint Stain Under Protective Shipping Film Models:  2014 and Prior GM Cars and Trucks     This bulletin has been revised to add the 2014 model year and update the Labor Operationto...
09-08-66-011B Information on Mounting Points for Pickup Box Accessories - (Jan 16 2013) Trunk Bed      Subject: Information on Mounting Points for Pickup Box Accessories Models:  2007-2013 Chevrolet Silverado 2007-2013 GMC Sierra This bulletin is being revised to add the 2012-2013 model years and include...
10-08-61-001C Information on Body Mount Bolt Stripped or Will Not Loosen - (Mar 22 2013) Panels - part 2      Service the cab mounting bolt and nut as required. Coat the perimeter of the access hole with RTV Silicone Sealant, GM-P/N-12378521 (inCanada, 88901148) or equivalent, to seal the bare edge of the metal. Install the...
10-08-61-001C Information on Body Mount Bolt Stripped or Will Not Loosen - (Mar 22 2013) Panels      Subject: Information on Body Mount Bolt Stripped or Will Not Loosen Models:  2010-2013 Chevrolet Silverado 2010-2013 GMC Sierra This bulletin is being revised to update the Parts Information section. Please...
11-01-39-005A Reduced Heater Performance with Winter Grille Cover Installed - (Feb 1 2013) Front Grille - part 2      Use the following steps to relocate the ambient (outside) air temperature sensor. Remove the radiator grille. Refer to the Radiator Grille Replacement procedure inSI.Remove the ambient air sensor from its current location by...
11-01-39-005A Reduced Heater Performance with Winter Grille Cover Installed - (Feb 1 2013) Front Grille      Subject: Reduced Heater Performance with Winter Grille Cover Installed Models:  2007-2013 Chevrolet Silverado 2500/3500 Series 2007-2013 GMC Sierra 2500/3500 Series Equipped with Duramax™ Diesel Engine...
99-08-51-001C Paint-less Dent Repair Process - (Feb 25 2013) Emblems Decals Paint      Subject: Paint-less Dent Repair Process Models:  2014 and Prior GM Passenger Cars and Light Duty Trucks with Steel Outer Body Panels This bulletin is being revised to add the 2013 and 2014 model years....
Assist Step Kit Installation (12 08 2011 and Forward) Moldings      Installation Instructions Part Number 22820420 Kit Contents Item Description Qty: Regular Cab Qty: Extended Cab Qty: Crew Cab 1 Tube Assembly Driver Side 1 1 1 2 Tube Assembly Passenger Side...
Decal or Stripe Replacement (HYBRID 2 Mode Lower Bodyside Door) Emblems Decals Paint      Decal or Stripe Replacement Callout Component Name Preliminary ProceduresUsing a J 25070 heat gun or equivalent, in a circular motion, remove the old decal from both lower door panels.Remove all adhesives as...
Decal or Stripe Replacement (Instruction) Emblems Decals Paint      Application Procedure Important:The striping material highlights vehicle surface imperfections. Eliminate all of thefollowing before applying the stripe or the decal: DingsRough metalPaint defectsUneven 2–tone paint breaklines...
Endgate Adjustment Panels      Adjustment Procedure With the endgate closed, determine the amount of adjustmentwill be needed.If adjustment is necessary, remove the endgate. Refer toEndgate Replacement.Mark the position of the hinges with a grease...
Endgate Cable Replacement Panels      Endgate Cable Replacement Callout Component Name Preliminary Procedure Remove the endgate latch lower bolt. Refer toEndgate Latch Replacement. 1 Endgate Cable Tip:Release the endgate cable from the endgate...
Endgate Emblem Nameplate Replacement (GMC) Identification Plates      Endgate Emblem/Nameplate Replacement Callout Component Name 1 Endgate Nameplate/Emblem (Sierra) Caution:Refer toExterior Trim Emblem Removal Caution. ProcedureUse a J 25070 heat gun or equivalent to remove the...
Endgate Emblem Nameplate Replacement (GMC SLE SLT) Identification Plates      Endgate Emblem/Nameplate Replacement Callout Component Name 1 Endgate Nameplate/Emblem (SLT) Caution:Refer toExterior Trim Emblem Removal Caution. ProcedureUse a J 25070 heat gun or equivalent to remove the old...
Endgate Emblem Nameplate Replacement (LT LS) Identification Plates      Endgate Emblem/Nameplate Replacement Callout Component Name 1 Endgate Nameplate/Emblem (LT) Caution:Refer toExterior Trim Emblem Removal Caution. ProcedureUse a J 25070 heat gun or equivalent to remove the old...
Endgate Emblem Nameplate Replacement (Silverado) Identification Plates      Endgate Emblem/Nameplate Replacement Callout Component Name 1 Endgate Nameplate/Emblem (Silverado) Caution:Refer toExterior Trim Emblem Removal Caution. ProcedureUse a J 25070 heat gun or equivalent to remove the...
Endgate Emblem Nameplate Replacement (TUF) Identification Plates      Endgate Emblem/Nameplate Replacement Callout Component Name 1 Endgate Nameplate Caution:Refer toExterior Trim Emblem Removal Caution. ProcedureThe part and surface should be 21°C (70°F) prior to installation. The...
Endgate Emblem Nameplate Replacement (Z71) Identification Plates      Endgate Emblem/Nameplate Replacement Callout Component Name 1 Endgate Nameplate/Emblem (Z71) Caution:Refer toExterior Trim Emblem Removal Caution. ProcedureUse a J 25070 heat gun or equivalent to remove the old...
Endgate Lower Hinge Replacement - Body Side Panels      Endgate Lower Hinge Replacement - Body Side Callout Component Name Preliminary Procedure Remove the pickup box endgate. Refer toEndgate Replacement. 1 Endgate Lower Hinge (Body Side) Bolt(Qty:-4)...
Endgate Replacement Panels      de, Endgate Replacement Callout Component Name Preliminary ProceduresDisconnect the electrical connector for the rearview camera,if equipped.Disconnect the endgate support cable by raising the endgateslightly and...
Engine Lower Front Splash Shield Replacement Panels Undertray Engine Splash Shields Belly Pan Underbody Trim Front Undertrays      Engine Lower Front Splash Shield Replacement Callout Component Name 1 Engine Lower Front Splash Shield Bolt(Qty:-2) Caution:Refer toFastener Caution. Tighten 5-Y(44-lb-in) 2 Engine Lower Front Splash...
Front Air Deflector Extension Replacement (GMC) Bumpers      Front Air Deflector Extension Replacement Callout Component Name Preliminary Procedure Remove the engine lower front splash shields. Refer toEngine Lower Front Splash Shield Replacement. 1 Front Air...
Front Air Deflector Replacement (GMC) Bumpers      Front Air Deflector Replacement Callout Component Name Preliminary Procedure Remove the front bumper impact bar. Refer toFront Bumper Impact Bar Removal and Installation. 1 Front Air Deflector Bolt (Qty:-2)...
Front Bumper End Cap Replacement (Chevrolet) Bumpers Front Bumper      Front Bumper End Cap Replacement Callout Component Name Preliminary ProceduresRemove the front bumper impact bar. Refer toFront Bumper Impact Bar Replacement.Remove the front bumper filler. Refer toFront Bumper Filler...