Workshop Repair and Service Manuals GMC SIERRA
Articles

Ergonomic Settings

Accelerator Pedal Bracket Replacement Pedal Position      Removal Procedure Note:Ensure the brake pedal assembly is adjusted to the lowestposition farthest from the drivers seat prior to removal of theaccelerator assembly. Failure to do so could result in incorrectstep-over height...
Brake Pedal Assembly Replacement Pedal Position      Removal ProcedureRemove the steering column from the vehicle. Refer toSteering Column Replacement.Disconnect the electrical connectors from the following components:Adjustable pedal motor assemblyAccelerator pedal position...
Memory Seat Control Module Replacement Seating Position      Memory Seat Control Module Replacement Callout Component Name Preliminary Procedure Remove the front driver seat. Refer toFront Seat Removal and Installation - Bucket. 1 Driver Seat Adjuster Outer Finish...
Fastener Tightening Specifications - 4WD Driveline Control Pedal Position      Fastener Tightening Specifications Application Specification Metric English Accelerator Actuator Screws 2.5-Y 22-lb-in Accelerator Pedal Bracket Nuts 9-Y 80-lb-in Adjustable Pedal Bracket Nuts...
Adjustable Pedal System Calibration Pedal Position      The memory seat module monitors the locations of both pedalassemblies in order to prevent a step over condition fromoccurring. Any time adjustable pedal system components arereplaced, such as a memory seat module or pedal...
Memory Seats Description and Operation Seating Position - part 2      In response to thissignal, the MSM applies battery voltage through the driver seathorizontal motor forward control circuit and ground through thedriver seat horizontal motor rearward control circuit to the motor.The motor runs...
Memory Seats Description and Operation Seating Position      The memory seat system consists of the followingcomponents: Memory seat moduleDriver door lock/window switchDriver seat adjuster switchDriver seat lumbar switchDriver memory/heated seat switchDriver door lock/window...
Memory Seat Control Module Programming and Setup Seating Position      If the memory seat module is replaced or if the module needsto be reprogrammed, refer toService Programming System (SPS).
Adjustable Pedals Description and Operation (with Memory) Pedal Position      The adjustable pedals system is controlled by the adjustablepedal switch and the memory seat module and operation can occuranytime the transmission is not in reverse. The adjustable pedalsassembly is moved forward or backward...
Adjustable Pedals Description and Operation (w o Memory) Pedal Position      The adjustable pedals system is controlled by the adjustablepedals switch and the adjustable pedals relay and operation canoccur only while the transmission selector lever is in the parkposition. The adjustable pedals assembly...