Workshop Repair and Service Manuals GMC SIERRA
Articles

Phone

Ending a Call      Press to end a call.
Call Waiting      Call waiting must be supported on the cell phone and enabled by the wireless service carrier. • Press to answer an incoming call when another call is active. The original call is placed on hold. • Press again to...
Receiving a Call      When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. • Press to answer the call. • Press to ignore a call.
Transferring Audio to the Bluetooth System from a Cell Phone      During a call with the audio on the cell phone, press . The audio transfers to the vehicle. If the audio does not transfer to the vehicle, use the audio transfer feature on the cell phone. See your cell phone manufacturer's...
Transferring Audio from the Bluetooth System to a Cell Phone      During a call with the audio in the vehicle: 1. Press . 2. Say “Transfer Call.”
Muting a Call      During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. • To mute a call, press , and then say “Mute call.” . To cancel mute, press , and then say...
Three-Way Calling      Three-way calling must be supported on the cell phone and enabled by the wireless service carrier. 1. While on a call, press . 2. Say “Three-way call.” 3. Use the dial or call command to dial the number of the third...
Using the “Re-dial” Command      1. Press and hold for two seconds. 2. After the tone, say “Re-dial.” Once connected, the person called will be heard through the audio speakers.
Using the “Digit Dial” Command      The digit dial command allows a phone number to be dialed by entering the digits one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone. If an unwanted number is...
Using the “Dial” or “Call” Command      1. Press and hold for two seconds. 2. Say “Dial” or “Call.” 3. Say the entire number without pausing, or say the name tag. Once connected, the person called will be heard through the audio speakers.
Listing Stored Numbers      The list command will list all stored numbers and name tags. Using the “List” Command 1. Press and hold for two seconds. 2. Say “Directory.” 3. Say “Hands-Free Calling.” 4. Say “List.”
Using the “Delete All Name Tags” Command      This command deletes all stored name tags in the Hands-Free Calling Directory and the OnStar Turn-by-Turn Destinations Directory, if equipped. To delete all name tags: 1. Press and hold for two seconds. 2. Say...
Using the “Delete” Command      1. Press and hold for two seconds. 2. Say “Delete.” 3. Say the name tag you want to delete.
Using the “Digit Store” Command      If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. To hear all of the numbers recognized by the system, say “Verify” at any time. 1. Press and hold for two seconds....
Using the “Store” Command      1. Press and hold for two seconds. 2. Say “Store.” 3. Say the phone number or group of numbers you want to store all at once with no pauses, then follow the directions given by the system to save a name tag for this number.
Connecting to a Different Phone      To connect to a different cell phone, the Bluetooth system looks for the next available cell phone in the order in which all the available cell phones were paired. Depending on which cell phone you want to connect to, you may...
Deleting a Paired Phone      If the phone name you want to delete is unknown, see “Listing All Paired and Connected Phones.” 1. Press and hold for two seconds. 2. Say “Bluetooth.” 3. Say “Delete.” The system asks which phone to delete. 4. Say the...
Listing All Paired and Connected Phones      The system can list all cell phones paired to it. If a paired cell phone is also connected to the vehicle, the system responds with “is connected” after that phone name. 1. Press and hold for two seconds. 2. Say...
Pairing a Phone      1. Press and hold for two seconds. 2. Say “Bluetooth.” This command can be skipped. 3. Say “Pair.” The system responds with instructions and a four-digit Personal Identification Number (PIN). The PIN is used in Step 5....
Bluetooth Controls      Use the buttons located on the steering wheel to operate the invehicle Bluetooth system. See Steering Wheel Controls on page 5?3 for more information. (Mute/Push To Talk): Press to answer incoming calls, confirm system...
Dual Tone Multi-Frequency (DTMF) Tones      The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu-driven phone system. Account numbers can also be stored for use. Sending a Number or...
Voice Pass-Thru      Voice pass-thru allows access to the voice recognition commands on the cell phone. See your cell phone manufacturer's user guide to see if the cell phone supports this feature. To access contacts stored in the cell phone:...
Other Information      The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by General Motors is under license. Other trademarks and trade names are those of their respective owners. See Radio...
Clearing the System      Unless information is deleted out of the in-vehicle Bluetooth system, it will be retained indefinitely. This includes all saved name tags in the phone book and phone pairing information. For information on how to delete this...