Workshop Repair and Service Manuals GMC SIERRA
Articles

Universal Remote System

Universal Remote System Programming      Vehicles with the Universal Remote System will have these buttons located in the headliner. This system provides a way to replace up to three remote control transmitters used to activate devices such as garage door...
Programming Universal Home Remote — Rolling Code      For questions or help programming the Universal Home Remote System, call 1-866-572-2728 or go to www.learcar2u.com. Most garage door openers sold after 1996 are Rolling Code units. Programming a garage door opener...
Programming Universal Home Remote — Fixed Code      For questions or help programming the Universal Home Remote System, call 1-866-572-2728 or go to www.learcar2u.com. Most garage door openers sold before 1996 are Fixed Code units. Programming a garage door opener...
Universal Remote System Operation      Press and hold the appropriate button for at least half of a second. The indicator light will come on while the signal is being transmitted.
Erasing Universal Home Remote Buttons      The programmed buttons should be erased when the vehicle is sold or the lease ends. To erase either Rolling Code or Fixed Code settings on the Universal Home Remote device: 1. Press and hold the two outside buttons at...
Reprogramming Universal Home Remote Buttons      Any of the three buttons can be reprogrammed by repeating the instructions.