Workshop Repair and Service Manuals GMC SIERRA
Articles

User Manual

Three-Way Calling      Three-way calling must be supported on the cell phone and enabled by the wireless service carrier. 1. While on a call, press . 2. Say “Three-way call.” 3. Use the dial or call command to dial the number of the third...
Using the “Re-dial” Command      1. Press and hold for two seconds. 2. After the tone, say “Re-dial.” Once connected, the person called will be heard through the audio speakers.
Using the “Digit Dial” Command      The digit dial command allows a phone number to be dialed by entering the digits one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone. If an unwanted number is...
Using the “Dial” or “Call” Command      1. Press and hold for two seconds. 2. Say “Dial” or “Call.” 3. Say the entire number without pausing, or say the name tag. Once connected, the person called will be heard through the audio speakers.
Listing Stored Numbers      The list command will list all stored numbers and name tags. Using the “List” Command 1. Press and hold for two seconds. 2. Say “Directory.” 3. Say “Hands-Free Calling.” 4. Say “List.”
Using the “Delete All Name Tags” Command      This command deletes all stored name tags in the Hands-Free Calling Directory and the OnStar Turn-by-Turn Destinations Directory, if equipped. To delete all name tags: 1. Press and hold for two seconds. 2. Say...
Using the “Delete” Command      1. Press and hold for two seconds. 2. Say “Delete.” 3. Say the name tag you want to delete.
Using the “Digit Store” Command      If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. To hear all of the numbers recognized by the system, say “Verify” at any time. 1. Press and hold for two seconds....
Using the “Store” Command      1. Press and hold for two seconds. 2. Say “Store.” 3. Say the phone number or group of numbers you want to store all at once with no pauses, then follow the directions given by the system to save a name tag for this number.
Connecting to a Different Phone      To connect to a different cell phone, the Bluetooth system looks for the next available cell phone in the order in which all the available cell phones were paired. Depending on which cell phone you want to connect to, you may...
Deleting a Paired Phone      If the phone name you want to delete is unknown, see “Listing All Paired and Connected Phones.” 1. Press and hold for two seconds. 2. Say “Bluetooth.” 3. Say “Delete.” The system asks which phone to delete. 4. Say the...
Listing All Paired and Connected Phones      The system can list all cell phones paired to it. If a paired cell phone is also connected to the vehicle, the system responds with “is connected” after that phone name. 1. Press and hold for two seconds. 2. Say...
Pairing a Phone      1. Press and hold for two seconds. 2. Say “Bluetooth.” This command can be skipped. 3. Say “Pair.” The system responds with instructions and a four-digit Personal Identification Number (PIN). The PIN is used in Step 5....
Bluetooth Controls      Use the buttons located on the steering wheel to operate the invehicle Bluetooth system. See Steering Wheel Controls on page 5?3 for more information. (Mute/Push To Talk): Press to answer incoming calls, confirm system...
Dual Tone Multi-Frequency (DTMF) Tones      The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu-driven phone system. Account numbers can also be stored for use. Sending a Number or...
Voice Pass-Thru      Voice pass-thru allows access to the voice recognition commands on the cell phone. See your cell phone manufacturer's user guide to see if the cell phone supports this feature. To access contacts stored in the cell phone:...
Steering Wheel Controls      Steering Wheel Controls If available, some audio controls can be adjusted at the steering wheel. : Press to go to the next favorite radio station, track on a CD, or folder on an iPod® or USB device. :...
Driver Information Center (DIC)      The DIC display is located at the bottom of the instrument panel cluster. It shows the status of many vehicle systems and enables access to the personalization menu. The DIC buttons are located on the instrument panel,...
Recommended Fluids and Lubricants      This maintenance section applies to vehicles with a gasoline engine. If the vehicle has a diesel engine and/or an Allison Transmission, see the maintenance schedule section in the DURAMAX® Diesel manual. Fluids and...
Weight of the Trailer Tongue      The tongue load (A) of any trailer is very important because it is also part of the vehicle weight. The Gross Vehicle Weight (GVW) includes the curb weight of the vehicle, any cargo carried in it, and the people who will be...
Setting the Clock      To set the time and date: 1. Turn the ignition key to ACC/ ACCESSORY or ON/RUN, then press , to turn the radio on. 2. Press to display HR, MIN, MM, DD, and YYYY (hour, minute, month, day, and year). 3. Press the...
Radio(s)      Radio with USB, CD, and DVD (MP3) : Press to turn the system on and off. Turn to increase or decrease the volume. BAND: Press to choose between FM, AM, or XM™, if equipped. : Select radio stations....
Weight of the Trailer      How heavy can a trailer safely be? It depends on how the rig is used. Speed, altitude, road grades, outside temperature, and how much the vehicle is used to pull a trailer are all important. It can depend on any special...
Cruise Control      Cruise Control : Press to turn the system on or off. The indicator light is on when cruise control is on and turns off when cruise control is off. : Press briefly to make the vehicle resume to a previously set...