Workshop Repair and Service Manuals GMC SIERRA
Articles

09-07-30-018D Warranty Administration - Change in Automatic Transmission Add Condition Documentation and Claim Submission - (May 10 2013) Automatic - part 2

Rating:

Note:For reconditioning work beyond base repair, OLH must be documented by clock time whenreconditioning begins and is completed. OLH should not be used for work included inthe base repair time.

Note:For steering wheel angle and/or front toe adjustment times, refer to labor code 8070012and add the applicable times to regular labor hours. (This only applies to FWD vehicleLTGs)

Global Warranty Management (GWM) Sample Transaction Information

Submit a transaction into GWM with the information indicated below:

Repair Performed

Transaction Type

Labor Operation

Base Labor Time

Additional Time (Adds)

Other Labor Time

Part Number(s)

Net Item Types

Transmission Oil Pump Replacement

ZREG

8465050

4.5

0.3

1.0

All Detailed Parts

As Appropriate

GM bulletins are intended for use by professional technicians,NOT a "do-it-yourselfer".  They are written to inform thesetechnicians of conditions that may occur on some vehicles, or toprovide information that could assist in the proper service of avehicle.  Properly trained technicians have the equipment,tools, safety instructions, and know-how to do a job properly andsafely.  If a condition is described, DO NOT assume that thebulletin applies to your vehicle, or that your vehicle will havethat condition.  See your GM dealer for information on whetheryour vehicle may benefit from the information.

#09-07-30-018D: Warranty Administration - Change in Automatic Transmission Add Condition Documentation and Claim Submission - (May 10, 2013) Automatic

WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION

Fluid Pump Cover Installation Automatic Transmission Unit Transmission Oil Pump     Fluid Pump Cover Installation Callout Component Name 1 Fluid Pump Cover Assembly 2 Fluid Pump Cover Bolts-M6-x-40-(Qty:-13) Note:Hand tighten only. 3 Alignment Tool and Bolt Caution:Refer...
First Range Automatic     When the selector lever is moved from Neutral-(N)to Drive-(D), the transmission shifts from neutral tofirst range operation. Shiftsolenoid-1-(SS1), SS2, and SS3 remainenergized. Pressure control solenoid-1-(PCS1)and the torque...
Electronic Component Description Automatic     Transmission Control Module A microcomputer controls the transmission by receiving andprocessing signals from various switches and sensors. Themicrocomputer determines shift sequences, shift timing, and clutchapply and...
Fluid Capacity Specifications Automatic     Fluid Capacity Specifications Application Specification Metric English Pan Removal and Filter Replacement – ApproximateCapacity-(6L80/6L90) 5.7-liters 6.0-quarts Overhaul – ApproximateCapacity-(6L80/6L90)...
Torque Converter End Play Inspection Automatic Torque Converter     Tools RequiredJ 43764 Torque Converter End Play GaugeJ 5959 Dial Indicator Clamp and AdjusterJ 7872 Magnetic Base Dial Indicator Position the torque converter-(3) on the work table so that the pump hub is facingup.Install J...
Bearings and Spacers Cleaning and Inspection Manual     Caution:Do not allow the bearings to spin. Turn them slowly by hand.Spinning the bearings may damage the race and the rollers. Clean all bearing components in a suitable solvent and airdry.Inspect the bearings and journals...