Workshop Repair and Service Manuals GMC SIERRA
Articles

Control Valve Body Disassemble Automatic Transmission Unit Control Valve Body

Rating:

Control Valve Body Disassemble Automatic Transmission Unit Control Valve Body

Warning:Refer toValve Springs Can Be Tightly Compressed Warning.

Remove the manual valve-(340).

Control Valve Body Disassemble Automatic Transmission Unit Control Valve Body

Remove the forward accumulator cover bolts-(364)and the forward accumulator cover-(363).Remove the forward accumulator spring-(356),forward accumulator piston-(354), and the forwardaccumulator pin-(355).Remove the low overrun valve spring-(362) and thelow overrun valve-(361).Remove the coiled spring pin-(360) and the boreplug-(359).Remove the forward abuse valve spring-(358) andthe forward abuse valve-(357).

Control Valve Body Disassemble Automatic Transmission Unit Control Valve Body

Remove the solenoid retainer-(395) and the1-2-shift solenoid-(367A).Remove the 1-2-shift valve-(366) andthe 1-2-shift valve spring-(365).

Control Valve Body Disassemble Automatic Transmission Unit Control Valve Body

368

Remove the solenoid retainer-(395) and the2-3-shift solenoid-(367B).Remove the 2-3-shuttle valve-(369) andthe 2-3-shift valve-(368).

Control Valve Body Disassemble Automatic Transmission Unit Control Valve Body

Remove the coiled spring pin-(360).Remove the 1-2-accumulator valvesleeve-(372).Remove the 1-2-accumulator valve-(371)and the 1-2-accumulator valvespring-(370).

Control Valve Body Disassemble Automatic Transmission Unit Control Valve Body

Remove the solenoid retainer bolt-(364A) and thesolenoid retainer-(378). Remove the pressure controlsolenoid-(377), note orientation upon removal.Compress the actuator feed limit valvespring-(375).Remove the bore plug retainer-(395) and releasethe spring slowly.Remove the bore plug-(376).Remove the actuator feed limit valve spring-(375)and the actuator feed limit valve-(374).

Control Valve Body Disassemble Automatic Transmission Unit Control Valve Body

Remove the bore plug retainer-(395) and the boreplug-(381).Remove the 3-2-downshift valvespring-(390) and the 3-2-downshiftvalve-(389).Remove the coiled spring pin-(360) and the boreplug-(359).Remove the reverse abuse valve spring-(388) andthe reverse abuse valve-(387).

Control Valve Body Disassemble Automatic Transmission Unit Control Valve Body

Remove the bore plug retainer-(395) and the boreplug-(381).Remove the 3-4-shift valve spring-(386)and the 3-4-shift valve-(385).

Control Valve Body Disassemble Automatic Transmission Unit Control Valve Body

Remove the bore plug retainer-(395) and the boreplug-(381).Remove the regulator apply valve-(380) and theregulator apply spring-(397) and the isolatorvalve-(398).

Control Valve Body Disassemble Automatic Transmission Unit Control Valve Body

Remove the bore plug retainer-(395) and the boreplug-(381).Remove the 3-4-relay valve-(384) andthe 4-3-sequence valve-(383) and the4-3-sequence valve spring-(382).

Control Valve Channel Plate - Control Solenoid Valve Assembly Side Automatic     Control Valve ChannelPlate-–-Control Solenoid ValveAssembly Side (10) Actuator Feed Limit (11) PS1 (12) PCS Line (15) PCS 3 Signal (19) PCS 4 Signal (20) Solenoid 1 Signal (21) PS3 (22) PS4...
Transmission Fluid Pump Seal Replacement Automatic     Transmission Fluid Pump Seal Replacement Callout Component Name 1 A/Trans Torque Dampener Fluid Seal Retaining Ring 2 A/Trans Fluid Pump Seal Special Tools J 45000 Seal Remover
Forward Clutch Backing Plate Selection Automatic Transmission Unit Automatic Clutches     Plate Thickness Identification 6.92–7.07-mm(0.272–0.278-in) A 6.33–6.48-mm(0.249–0.255-in) B 5.74–5.89-mm(0.226–0.232-in) C 5.15–5.30-mm(0.203–0.208-in) D 4.56–4.71-mm(0.180–0.185-in)...
Clutch Backing Plate Retaining Ring Specifications Automatic     Table 1: 3–5 Reverse Clutch Table 2: 1–2–3–4 Clutch Table 3: 4–5–6 Clutch Table 4: Low/Reverse Clutch 3–5 Reverse Clutch Clutch Pack Travel Specification –1.21–1.79-mm(0.048–0.070-in) Retaining Ring...
1-2-3-4 and 4-5-6 Clutch Housing Reluctor Wheel Replacement Automatic     Special ToolsJ 43767Tone Wheel StakerJ 43768Tone Wheel Driver For equivalent regional tools, refer toSpecial Tools. Removal Procedure Grind the stakes from the1–2–3–4, 4–5–6clutch housing-(1). Position the 1–2–3–4,4–5–6...
Lubrication Specifications Manual     Lubrication Specifications Application Metric English 5W-30 Synthetic OilP/N-ET-M99 3.5-L 3.7-qt