Workshop Repair and Service Manuals GMC SIERRA
Articles

Input Internal Ring Gear Inspection Automatic

Rating:

Input Internal Ring Gear Inspection Automatic

Important:Clutch plate movement can cause notching on the externalsplines of the input internal ring gear.

Inspect the external splines of the input internal ringgear-(1) for notching.Replace the ring gear if detectable notching hasoccurred.
Reverse Automatic     When the gear selector lever is moved to the Reverse (R)position (from the Park position) the normally high C35R pressurecontrol solenoid 2 is commanded ON and the following changes occurin the transmission’s hydraulic and...
Fastener Tightening Specifications - 4WD Driveline Control     Fastener Tightening Specifications Application Specification Metric English Clutch Actuator Cylinder Bolt 8-Y 71-lb-in Clutch Pedal to Brake Module Bolt 50-Y 37-lb-ft Clutch Pedal to Clutch...
Output Carrier Inspection Automatic     Measure the end play between the outputcarrier-(1) and the thrust washer-(2) at eachpinion gear-(3).Replace the output carrier assembly if the end play exceedsspecifications. Specification The maximum pinion end play is...
Drive Range First Gear Automatic     When the gear selector lever is moved to the OverdriveRange-(D) position from the Neutral-(N)position, after the first 1–2 shift has occurred, thefollowing changes occure to shift the transmission into OverdriveRange – First...
Torque Converter Fluid Seal Replacement Automatic Torque Converter     Torque Converter Fluid Seal Replacement Callout Component Name 1 Torque Converter Fluid Seal Retaining Ring 2 Torque Converter Fluid Seal Assembly Note:The seal can be installed by hand. Special Tool...
Intermediate Carrier Assembly Inspection Automatic     Check the end play between the intermediate carrierassembly-(1) and the thrust washer-(2) ateach pinion gear-(3).If the end play exceeds specifications replace theintermediate carrier assembly. Specification The maximum end...