Workshop Repair and Service Manuals GMC SIERRA
Articles

Range Selector Lever Cable Bracket Replacement Automatic "Shifter Input and Linkage"

Rating:

Removal Procedure

Range Selector Lever Cable Bracket Replacement Automatic

Apply the park brake.Shift the transmission into neutral.Raise and suitably support the vehicle. Refer toLifting and Jacking the Vehicle.Remove the retainer that secures the cable to the bracket.Depress the tangs and remove the cable from the bracket.

Range Selector Lever Cable Bracket Replacement Automatic

Remove the bolts (1) securing the transmission range selector cable bracket (2) tothe transmission.Remove the transmission range selector cable bracket.Installation Procedure

Range Selector Lever Cable Bracket Replacement Automatic

Install the transmission range selector cable bracket.

Caution:Refer toFastener Caution.

Install the transmission range selector cable bracket bolts (1) and tighten to 22-Y-(16-lb-ft).

Range Selector Lever Cable Bracket Replacement Automatic

Align and install the cable to the bracket.Install the retainer that secures the cable to the bracket.Lower the vehicle.Check the vehicle for proper operation. If cable adjustment is necessary, refer toRange Selector Lever Cable Adjustment.

Control Valve Assembly Assemble Automatic     Table 1: Valve Assembly to Channel Plate Assemble Table 2: Filter Plate Installation Table 3: Control Solenoid (w/Body and TCM) Valve Installation Table 4: Control Valve Body, Upper and Lower Assembly...
Pressure Switch Manifold (PSM) Logic Automatic     Pressure Switch Manifold (PSM) Logic Range Pressure Switch 1– N/O Pressure Switch 2– N/O Pressure Switch 3– N/O Pressure Switch 4– N/C Switch Status Scan Tool Status Switch Status Scan Tool Status Switch Status...
Rear Case Installation Automatic     Rear Case Installation Callout Component Name 1 A/Trans Rear Case Gasket Note:Verify that the sun gear-–-3rd position is on the sun gear shaft assembly-–-3rd position. 2 A/Trans Rear Case Assembly...
Case Inspection Automatic     Case Inspection Callout Component Name Caution:After cleaning the transmission components, allow to air dry.Do not use cloth or paper towels in order to dry any transmissioncomponents. Lint from the towels can cause...
Manual Shift Shaft Position Switch Replacement Automatic     Manual Shift Shaft Position Switch Replacement Callout Component Name Preliminary ProceduresRaise and support the vehicle. Refer toLifting and Jacking the Vehicle.Remove the transmission fluid pan and filter. Refer...
Transmission Adaptive Functions Automatic Transmission Unit     The transmission utilizes a line pressure control systemduring upshifts to compensate for the normal wear of transmissioncomponents. As the apply components within the transmission wear orchange over time, shift time (the time...