Workshop Repair and Service Manuals GMC SIERRA
Articles

Temperature Valve Actuator Replacement - Left Side

Rating:

Temperature Valve Actuator Replacement - Left Side

Temperature Valve Actuator Replacement - Left Side

Callout

Component Name

Caution:In order to avoid actuator damage, DO NOT apply power to theactuator when it is not installed in the HVAC module.

Preliminary ProceduresRemove the instrument panel insulator. Refer toInstrument Panel Insulator Replacement.Disconnect the electrical connector from the air temperatureactuator.

1

Air Temperature Actuator Screw (Qty:-2)

Caution:Refer toFastener Caution.

Tighten

1.6-Y(14-lb-in)

2

Air Temperature Actuator

Procedure

Re-calibrate the air temperature actuator. Refer toActuator Recalibration.

Note:Apply Dielectric Nyogel 760G grease to the electricalconnector. Dispense grease on the connector to cover all holes inthe connector.

Temperature Valve Actuator Replacement - Left Side     Temperature Valve Actuator Replacement - Left Side Callout Component Name Caution:In order to avoid actuator damage, DO NOT apply power to theactuator when it is not installed in the HVAC module. Preliminary...
Air Delivery Description and Operation - part 2     The HVAC control module sends differentsignals to the mode door actuator through the mode door controlcircuit. Zero volts drives the actuator in one direction while5-volts moves the actuator in the opposite direction.When the...
Mode Valve Actuator Replacement     Mode Valve Actuator Replacement Callout Component Name Caution:In order to avoid actuator damage, DO NOT apply power to theactuator when it is not installed in the HVAC module. Preliminary ProcedureRemove the knee...
Air Temperature Description and Operation - part 3     The ambient air temperature is less than 4°C (40°F).The evaporator temperature is less than 3°C (38°F).The throttle position is 100%.The A/C high side pressure is more than 2957-kPa (429-psi).The engine coolant temperature...
Temperature Valve Actuator Replacement     Temperature Valve Actuator Replacement Callout Component Name Caution:In order to avoid actuator damage, DO NOT apply power to theactuator when it is not installed in the HVAC module. Preliminary ProcedureRemove the...
Air Temperature Description and Operation - part 6     To place the auxiliary HVAC system in Automatic mode, the following is required: The auxiliary blower motor switch on the auxiliary HVAC control assembly must be inthe Auto position.The auxiliary mode switch on the auxiliary...